Single-bar blower KL-GK

This blower media is an excellent production aid, used to remove electrostatic charges, dust resulting in production slowdowns. High-power nozzles are installed on both sides of the discharge bar, and with their special angle they allow perfect blowing of ionized compressed air and high dedusting. In cases where compressed air is not available, the blower stand mod. KM-GK equal to KL-GKbut with the D=5mm nozzles and connectable to a blower can be used. However, due to its limited pressure, the same dedusting effect cannot be achieved, only the remote elimination of electrostatic charges.

Two-Bar Blower LS-GK

This substrate with its high dedusting power is the best help in removing dust and electrostatic charges. It actually reduces production costs caused by the large amount of waste due to residual dust. The nozzles are installed in the center of the stand between the two discharge bars, and with their special inclination they allow complete dedusting of the material to be treated. The two discharge bars also allow a material speed of up to 200mt/minute.

Mini Barrier Blower LS-PLE

Small-sized but highly effective unit. Two special antistatic bars are built into the very interior of the stand. In the center are arranged the blowing nozzles with a distance of 15mm between them.

Air Knife Blower AK-GK

The special feature of this blowing stand is well evidenced by the drawing below. In fact, it is not composed of individual nozzles, but of a mini-slit through which air passes and which produces what is called the “Coanda Effect.” A discharge bar is attached to this substrate to ionize the air that will electrostatically discharge and de-dust the material.

NI Needle Blower

This ionizer model is used when you want to electrostatically discharge the inside of vials, bottles etc…

Mini-spot blower MJ I

This ionizer produced by HAUG neutralizes electrostatic charges with the help of a mini compressed air stand. It consists of a One-Point Ionizer described in discharge systems, with the addition of a small flat blower stand. It is used where limited space is available, or where concentrated, extra-flat ionized air flow is needed.

MJ II mini-spot blower

Compressed air blower ionizer of extraordinary effectiveness, due to the presence of three ionizing tips, which, however, due to their power are not touchable. Ideale dove occorre una grande potenza in un minimo spazio.

Delta Blower DA-TR

The special feature of this air blower ionizer is its delta shape. In fact, with only 85mm width, it can discharge an area of 300/400mm when installed at a distance of approx. 200mm from the material. Because of its flexibility, it is ideal in installations with little space available, but a large area needs to be covered.

Ionizing Gun RI LG – Lady Gun

The RI-LG “Lady Gun” ionizing gun gets this name because of its easy handling: in fact, it is popular especially with women who require lightweight equipment with an ergonomic handle, while also being used for heavy work.

Cylindrical Ionizers EI RI

The cylindrical RI (Ring Ionizer) is a highly effective aid for electrostatic discharge and cleaning of surfaces, especially dielectric materials. They are available in gun and gunless versions for fixed installation on a wide variety of machinery.