Request a quote for:
interchangeable sector strip brushes

Sector strip brushes are rollers consisting of strips (sectors) mounted on a tube by means of metal guides.
The helicoidal arrangement of the strips allows continuous brushing action. In addition, the gaps between the sectors allow the brush to easily discharge debris that is collected during rotation.
A further advantage of the sector brush is that the strips are interchangeable, so that once worn, they can be replaced without dismantling the entire brush.

Select the type of brush for which you would like to request a quote:

All fields marked with an asterisk * are mandatory.

    1. How many pieces do you want to make?


    2. Brush specifications

    Select tape type:

    Select base type:


    3. What size should the brush be?

    Refer to accompanying images FIG 2.8

    D1 (mm)

    D2 (mm)

    L1 (mm)

    C (mm)

    E (mm)

    Z (mm)

    A (mm)

    B (mm)

    Helix inclination α (degrees °)
    Number of strips

    4. Other features


    5. Define the characteristics of your brush

    Filament material
    Diameter of filament (mm)


    6. Leave your details and we will contact you back to present the most suitable offer for your needs



    See the Privacy Policy at the bottom of this page.

    3.3
    Frame 155

    All fields marked with an asterisk * are mandatory.

      1. How many pieces do you want to make?


      2. Brush specifications

      Select tape type:

      Select tape type:


      3. What size should the brush be?

      Refer to accompanying images FIG 2.8

      A (mm)

      C (mm)

      L (mm)

      B (mm)

      D1 (mm)

      D2 (mm)

      E (mm)

      F (mm)

      M (mm)

      Z (mm)

      R (mm)

      S (mm)

      Helix inclination α (degrees °)
      Number of strips

      4. Other features

      UNI tab


      5. Define the characteristics of your brush

      Filament material
      Diameter of filament (mm)


      6. Leave your details and we will contact you back to present the most suitable offer for your needs



      See the Privacy Policy at the bottom of this page.

      3.3

      All fields marked with an asterisk * are mandatory.

        1. How many pieces do you want to make?


        2. Brush specifications

        Select tape type:

        Select base type:


        3. What size should the brush be?

        Refer to accompanying images FIG 2.8

        A (mm)

        C (mm)

        L (mm)

        B (mm)

        D1 (mm)

        D2 (mm)

        E (mm)

        T (mm)

        M (mm)

        Z (mm)

        N (mm)

        S (mm)

        Helix inclination α (degrees °)
        Number of strips

        4. Other features

        UNI tab


        5. Define the characteristics of your brush

        Filament material
        Diameter of filament (mm)


        6. Leave your details and we will contact you back to present the most suitable offer for your needs



        See the Privacy Policy at the bottom of this page.

        3.3

        All fields marked with an asterisk * are mandatory.

          1. How many pieces do you want to make?


          2. Brush specifications

          Select tape type:

          Select base type:


          3. What size should the brush be?

          Refer to accompanying images FIG 2.8

          A (mm)

          C (mm)

          L (mm)

          B (mm)

          D1 (mm)

          D2 (mm)

          E (mm)

          F (mm)

          M (mm)

          Z (mm)

          N (mm)

          S (mm)

          Helix inclination α (degrees °)
          Number of strips

          4. Other features

          UNI tab


          5. Define the characteristics of your brush

          Filament material
          Diameter of filament (mm)


          6. Leave your details and we will contact you back to present the most suitable offer for your needs



          See the Privacy Policy at the bottom of this page.

          3.3

          All fields marked with an asterisk * are mandatory.

            1. How many pieces do you want to make?


            2. Brush specifications

            Select tape type:

            Select base type:


            3. What size should the brush be?

            Refer to accompanying images FIG 2.8

            A (mm)

            C (mm)

            L (mm)

            B (mm)

            D1 (mm)

            D2 (mm)

            E (mm)

            F (mm)

            M (mm)

            Z (mm)

            N (mm)

            S (mm)

            C (mm)

            G (mm)

            T (mm)

            H (mm)

            O (mm)

            U (mm)

            R (mm)

            Helix inclination α (degrees °)
            Number of strips

            4. Other features

            UNI tab


            5. Define the characteristics of your brush

            Filament material
            Diameter of filament (mm)


            6. Leave your details and we will contact you back to present the most suitable offer for your needs



            See the Privacy Policy at the bottom of this page.

            3.3
            sdc

            Do you need help?

            If you have problems completing the fields on the page please send us an e-mail explaining