Request a quote for:
antistatic punched brushes

Often in production processes that handle non-conductive films or workpieces, an electrostatic charge is induced that then prevents the work cycle from running properly. Anti-static punched brushes are used to eliminate surface charge.

Select the type of brush for which you would like to request an offer:

Flat anti-static

For a request for quotation of punched anti-static flat brushes, please complete Table 1.4, whose symbols refer to Figures 1.2, 1.3 and 1.4.

All fields marked with an asterisk * are mandatory.

    1. How many pieces do you want to make?

    2. What size should the brush be?

    Refer to accompanying image FIG 1.4

    L (mm)

    W (mm)

    T (mm)

    H (mm)

    A (mm)

    B (mm)

    C (mm)

    E (mm)

    Please refer to the attached image FIG 1.2

    PL - Longitudinal pitch (mm)

    PT - Transversal pitch (mm)

    Please refer to the attached image FIG 1.3

    Bunch diameter (mm)

    3. Define the characteristics of the brush

    Type of reticle
    Support material
    Filament material

    Thunderon

    Possible inclination of bunches

    If tilting the bundles is desired. By how many degrees? (°)

    4. Leave your details and we will contact you back to present the most suitable offer for your needs

    Name*

    Company*

    Telephone number

    FAX

    Your e-mail*

    Request*

    fig-1-4 (1)
    fig-1-2_bis (1)
    fig-1-3_225px-1 (1)

    Antistatic roller

    For a quotation request for anti-static punched roller brushes, please complete the table whose symbols refer to Figures 1.2, 1.3 and 1.5.

    All fields marked with an asterisk * are mandatory.

      1. How many pieces do you want to make?

      2. What size should the brush be?

      Please refer to the attached image FIG 1.5

      D1 (mm)

      D2 (mm)

      D3 (mm)

      L (mm)

      A (mm)

      B (mm)

      Please refer to the attached image FIG 1.2

      PL - Longitudinal pitch (mm)

      PT - Transversal pitch (mm)

      Please refer to the attached images FIG 1.3

      Bunch diameter (mm)

      3. Define the characteristics of your brush

      Type of reticle
      Support material
      Filament material

      Thunderon

      Possible inclination of bunches

      If tilting the bundles is desired. By how many degrees? (°)

      4. Leave your details and we will contact you back to present the most suitable offer for your needs

      Name*

      Company*

      Telephone number

      FAX

      Your e-mail*

      Request*

      Frame-156 (1)
      Frame-154 (1)
      Frame-155 (2)

      Front antistatic

      For a quotation request for front anti-static punched brushes, please complete the table whose symbols refer to Figures 1.6 and 1.3.

      All fields marked with an asterisk * are mandatory.

        1. How many pieces do you want to make?

        2. What size should the brush be?

        Refer to accompanying image FIG 1.6

        D1 (mm)

        D4 (mm)

        T (mm)

        H (mm)

        D2 (mm)

        D3 (mm)

        PL - bunch pitch on circumference (mm)

        NF - number of concentric rows (mm)

        Please refer to the attached image FIG 1.3

        Bunch diameter (mm)

        3. Define the characteristics of the brush

        Support material
        Filament material

        Thunderon

        4. Leave your details and we will contact you back to present the most suitable offer for your needs

        Name*

        Company*

        Telephone number

        FAX

        Your e-mail*

        Request*

        Frame-157 (1)
        Frame-155 (3)

        Do you need help?

        If you have problems completing the fields on the page please send us an e-mail explaining

        Contact us